P-200 P-260 P-320 PET Preform Injection Molding System
Ngā āhuatanga
- Te whakamatao i te mata o roto o te preform me te kore e whakamahi i te hau pehanga teitei, kaore i rite ki te nuinga o nga punaha whakamahana i muri i te pokepokea ai ka whakamatao noa te mata o waho.
2.Ko te whakamahi huringa pai ake - kei te whakairihia ki runga i te pereti neke, ka kaha tonu te punaha whakamahana i roto i te 85% o te waa huringa katoa.
3.Ko te kaha o te punaha whakarewa werohanga PET mai i te 230 ki te 320 tonnes (2000KN ki te 3200KN), a kei te waatea mo te morahi morahi o mua me te 96 nga kohao.
Whakatakotoranga
| TAUIRA | UNIT | P-200 | P-260 | P-320 | |
| Waenga Werohanga | Diamita Tiu | mm | 70 | 75 | 80 |
| Tiuri L/D Ratio | 25 | 25 | 25 | ||
| Rōrahi Matā | cm3 | 1016 | 1378 | 1689 | |
| Werohanga Weight PET | g | 1087 | 1474 | 1807 | |
| Reiti Werohanga | g/s | 482 | 496 | 605 | |
| Pehenga Werohanga | Mpa | 105 | 127 | 130 | |
| Tere Tiu | rpm | 110 | 120 | 120 | |
| Wae Rawhi | Te Kaha Raima | kn | 2000 | 2600 | 3200 |
| Te Pereti Huringa | mm | 490 | 550 | 585 | |
| Max.Mould Teitei | mm | 540 | 580 | 720 | |
| Min.Mould Teitei | mm | 200 | 200 | 300 | |
| Mokowā Pae Herea(W×H) | mm | 530×530 | 580×580 | 660×760 | |
| Te kaha tuku | kn | 80 | 126 | 180 | |
| Te Putanga Whakaputa | mm | 140 | 150 | 180 | |
| Tau Whakaputa | n | 5 | 5 | 9 | |
| Ko etahi atu | Max.Pump Pressure | Mpa | 16 | 16 | 16 |
| Te Mana Puma | kw | 30 | 37 | 44 | |
| Te Mana Whakawera | kw | 28 | 32 | 37 | |
| (L×W×H)Rahi | M | 6×1.5×1.6 | 6.8×1.6×1.8 | 7.7×1.8×2 | |
| Pauna Miihini | T | 7 | 8.5 | 13 | |
Tuhia to korero ki konei ka tukuna mai ki a matou
